The Gear Mag is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Top 5 Best Glue for Particle Board in 2020

Google+ Pinterest LinkedIn Tumblr +

Whether you are installing a new countertop in the kitchen or buying furniture at a cheaper rate, particle board is your go-to choice. It is an affordable material that looks good and lasts quite long if you take care of it.

Although they might not match the quality of MDF or other hardwood, the value for the price is exceptional. However, if your particle board does break on you, or you simply want to experiment with this material, you would need the best glue for particle board.

With the right adhesive product, you can fashion this material in any way you want. In this article, we will take a look at some of the best adhesive for particle board that you can find on the market for any and all of your requirements.

Top 5 Best Glue for Particle Board Reviews

Finding the right glue for particle board might be difficult for someone who has no experience with it. Considering that using the wrong glue will give you subpar results at best, it is better not to take a random guess while choosing it.

In the following section of the article, we will take a look at the five best glue for particle board that you can buy for the best results when trying to work with the material.

1. Elmer’s E7010 Carpenter’s Wood Glue

Elmer's E7010 Carpenter's Wood Glue, Interior, 8 Ounces
  • 8 ounce bottle of Carpenter's Wood Glue
  • Great for carpentry and home repairs
  • Non-toxic, no harmful fumes and easy to clean up with water
  • Bonds stronger than wood
  • This is an aftermarket of generic part

At the top of our list, we have the superior wood glue by Elmer’s. This unit comes in a well-designed bottle with 8 ounces of adhesive that can last you a good while. It provides a combination of performance and affordability that is hard to find elsewhere.

The glue is perfect for any sort of home repair or carpentry projects. So it is no wonder to see how well it works with particle boards. Furthermore, the adhesive does not produce any harmful or unpleasant odors, which is a plus when buying wood glue.

2. Gorilla Wood Glue, 4 ounce Bottle

Gorilla Wood Glue, 4 ounce Bottle, (Pack of 1)
  • Easy-to-use, water based adhesive with Gorilla holding power
  • Best for building, carpentry or hobby projects using any type of wood
  • Complete Projects Faster; Requires only 20 - 30 minutes of clamp time, fully cured in 24 hours
  • Use Indoors or Outdoors; Passes ANSI/HPVA Type II water resistance
  • Versatile; Ideal for use on hardwoods, softwoods and natural wood composites

Gorilla is a much-respected name in the glue industry. Because of their excellence in making high-end, budget-friendly adhesive products, they have a special place in the market. Looking at their wood glue, any doubts you may have about the brand quickly fades away.

It comes in a 4-ounce bottle containing high-performance wood glue. The formula is water-based, which means you can dilute it to extend the drying time, giving you precise control over your application. Whether you are working with hardwood, particleboard, or MDF, you can safely rely on the product to do its job perfectly.

3. J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe

J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe -  Translucent Yellow - 25 ml
472 Reviews
J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml
  • J-B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl). J-B Weld PlasticWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure. J-B Weld PlasticWeld set and cure color is Translucent Yellow.
  • STRENGTH: J-B Weld PlasticWeld has tensile strength of 3900 PSI.
  • SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

If all else fails, you can count on J-B Weld to do the job. This quick-setting epoxy glue might be just the right product for any of your projects involving particle board. Its two-part adhesive formula features high tensile strength and a quick-setting and curing period.

In addition to the two-part epoxy, the package also contains a small tray and stirrer to help you mix the adhesive elements. After mixing the glue, it takes only 5 minutes for the glue to grab surfaces and 1 hour to cure fully. With a tensile strength of 3900 PSI, you can be sure of the glue’s durability and performance.

4. Franklin INTERL 5064 16OZ TITEBOND Glue

Sale
Franklin INTERL 5064 16OZ TITEBOND Glue, 16 Opunce
  • An Aliphatic Resin Glue. Features The Tack, Toughness And Durability Of Liquid Hide Glue. Equal Or Superior To Any Other Glue In Strength And Versatility. Is Not Waterproof. Comes In Plastic Container
  • Country Of Origin: United States
  • From The Brand Name: Franklin Interl
  • Color Name: Yellow

Particle board might be a particularly difficult material to work with because of its fragility. But with a steady hand and the perfect wood glue, you can take care of it quite easily. The excellent wood glue by Franklin Machine Products can make half of your problems when working with this material go away instantly.

It features an aliphatic resin formula that features higher strength and tougher bonds from wooden materials. Without a doubt, it can match the performance of any other glue, if not exceed it. The one bad thing about the product is that it is not very water-resistant. But if that is not an issue, it is a perfect choice.

5. Titebond T27659 Melamine Wood Glue

Glue, Melamine, 1 Gal, White
  • Price For: Each Green Environmental Attribute: VOC Levels Meet SCAQMD Requirements Characteristics: Fast Setting, Dries Clear, Long Open Time, Fast Initial Tack Application: Woodworking Item: Glue Type: Melamine Size: 1 gal. Color: White Temp. Range: Above 40 Degrees F Application Time: 5 min. Country of Origin (subject to change): United States

To wrap up our list of reviews, we will look at a unique melamine wood glue by the brand Titebond. If you work with wood frequently, buying a small bottle might not be very smart. This unit comes with 1 gallon of adhesive in a large plastic bottle. So you do not need to worry about buying another one any time soon.

The adhesive features a fast-drying formula with increased strength and bonding performance. It is specifically designed for melamine, which, as you might know, is a common coating over particleboard. As a result, it is safe to say that it works perfectly when you take on a project involving this material.

Frequently Asked Questions

With the list of products out of the way, we can focus our attention on some of the common questions people have regarding the best glue for particle board. These answers will help you figure out which adhesive would serve you best for the project you are working on and make the correct choice.

So without further delay, here are the answers to some of the questions people frequently asked when searching for the best glue for particle board.

  1. How do you fix a cracked particle board?

Fixing a cracked particle board can be tricky, even if you are a skilled woodworker. The structure and composition of the particle board make it susceptible to shattering if there is a crack. To make matters worse, you might further damage the board if you handle it incorrectly.

In some cases, a particle board can come with a painted melamine coat, which is essentially a plastic film. Although this element protects the board from moisture damage, it can make the repairing process a bit more difficult. Here are a few ways you can repair a cracked particle board.

  • If you have the original piece that broke off, you can try to reattach the piece with the rest of the board. You would need to apply a modest amount of epoxy glue to both surfaces and clamp them together. It might leave blemishes on the surface when the glue dries, so be prepared to refinish the board later.
  • If the crack is somewhat large, and you cannot fashion a repair from the original piece, you need to make a half lap repair. To do this, you need to remove the adjoining sections along the crack. Then, you need to use epoxy to add another piece of particle board in the empty space. Make sure to use clamps.
  • If your board has melamine coating, you can find some readily available replacement pieces in the shop. You need wood glue and clamps to make the bond between the two pieces of particle board. However, with melamine coating, you do not need to refinish the board.

In most cases, if you are fixing a cracked particle board, you need to do some finish work afterward. Because of the nature of the board, two pieces might not match the same wood density. Thankfully, a little sanding can bring them down to size.

  1. What is the difference between a particle board and a fiber board?

Many people have a misconception about the particle board and the fiber board. While a lot of people believe they are the one and the same, there is some striking difference between the two materials.

  • Particle Board

The particle board is made using waste wood, which makes it relatively cheap. It contains a combination of sawdust and resin. The two materials are heat pressed under high pressure to make particle board.

This type of board is a commonly used material in low-end furniture. Or floor underlayment. It is also widely used in kitchen countertops. It can break or crack easily when molded and usually come with a laminated coating to improve its visuals.

  • Fiber Board

Fiber board is also referred to as medium-density fiber board or MDF. These are quite expensive and feature higher durability compared to particleboard. Instead of using wood dust, fiber board uses small fibers of wood in its construction.

This type of board is used in high-end furniture and cabinets. It resists impact to a greater degree when compared to particle board. They also offer a degree of flexibility and can be molded into different shapes to create a variety of designs. Furthermore, a fiber board responds to paint better without any form of warping.

  1. How do you strengthen the durability of particle board?

Particle board is a cost-effective material that is widely used in a lot of works. But the lacking in durability is a major concern for anybody working with it. Thankfully there are a few ways to improve the strength of a particle board and enhance its durability.

  • Laminating

Laminating your board will strengthen your board to a high degree. Most particle boards for kitchen countertops now come with laminating. It protects the outer part of the board from moisture damage.

  • Sealing

Sealing the board is another popular technique to extend the lifetime of your board. Using a good quality sealer can drastically affect how long the particleboard survives. Even using a plain lacquer can improve its quality. Using a sealer ensures that the board retains its strength indefinitely.

  • Bracing

If you can access the backside of the board, you can reinforce it using plywood. You would need to use wood glue and small strips of plywood to brace the weak points of your board. Although it does not guarantee the boards durability, it improves its strength dramatically.

  • Doubling

A simple way to prevent flaking is to double up on the particleboard. What it means is that instead of using a single piece of particle board, you can use two pieces and glue them together. You can even laminate the two pieces or seal them to strengthen them further.

  1. How do you seal particle board?

If you want to make sure your particle board remains fresh and working for an indefinite period, you will want to use a sealer to seal it. Sealing the board protects it from damage against moisture. Considering it is a widely used material in the kitchen and bathroom countertops, you want all the protection against moisture damage you can get.

Here are the steps to seal a particle board before installing it.

  • The first step to sealing the board is cutting it down to size. Mark out your requirements and cut the board down. A circular saw can help you get precise and accurate cuts in this step. Make sure you are wearing safety goggles to prevent splinters from getting into your eyes.
  • Take your can of acrylic sealer and give it a few shakes. Then using a brush, apply a coat of the sealer along the edges of the board and any other exposed edges. These areas are the most vulnerable to moisture damage.
  • It might take several hours for the sealer to dry completely. You can leave it overnight to make sure the sealer takes full effect. After drying, you can install the particle board.
  1. How to attach Particle Board to Wood?

Attaching a particle board to wood can be tricky if you do not know how to do it. This type of board breaks easily, so screwing it into place is not a good option. If you are careful, you can do it; however, any slight misstep will leave you with a cracked product.

The best way to attach a particle board to wood is to use wood glue. All the products on our list work perfectly for particle board. These are all viable options that should give you good results when you are taking on a project like this.

Final Thoughts

When you are working with particle boards, there is no room for error. Without the right glue, you will not be able to get the result that you are looking for, no matter your skill or experience.

We hope you found our article on the best glue for particle board helpful and informative in your quest for finding the right adhesive.

Share.

About Author

An ex-professional racquetball coach who now runs a blog site for a hobby. This site is aimed at the beginners who don’t know anything about playing racquetball, squash, table tennis, and/or never heard of it. You might also find posts related to my DIY hobbies. You can find me on LinkedIn. #love_for_sports #love_for_tools

Leave A Reply

error: Content is protected !!