Most of the furniture we buy nowadays looks like hardwood, while it is surprisingly lightweight. However, this modern furniture is mainly made of particleboard cores covered with a thin layer of hardwood veneer.
These artificial particleboards are available in different qualities, and you can pick the right one based on the merit of your projects. In addition, you will find boards with various finishes like cherry, oak, maple, etc.
However, what to use to join the pieces together firmly? Well, you can use nails. But, that is not the only solution or best fastener. Your go-to solution is strong wood glue when you need to stick boards together.
Now the question is, how can you quickly select the best glue for particle board? And you are at the right place for your solution. Read the guide. It has covered all the necessary information for you.
Author’s Picked 3 Best Particle Board Glue
Our best picks are here. Check the comparison list and get the most appropriate glue.
Gorilla Ultimate Waterproof
Lineco PVA Adhesive
Gorilla Clear Glue
What is a Particle Board
Particle board, or particleboard, is a low-density fiberboard (LDF). It’s an engineered product, mainly made of wood shavings, sawdust, and sawmill surplus. All these materials are mixed with resins and then highly compressed at a high temperature to give a board shape.
A colored film is used as the top layer that emulates designs like veneer, stones, or any irregular jacquard.
Particle board is neither resistant to moisture nor takes paint well either. That is why most particle boards are covered with glued veneers.
What is Particle Board Used for
Particle boards are low-density fiberboards or chipboards. Particle board uses differ based on the properties. However, it is used for interior decoration, the inside lining of walls, and ceilings. Plus, you can also use it for floor decoration and roof cover.
Types of Glue for Laminating
Laminating has a comprehensive definition when it comes to applying particle board. First, Woodcrafters use glue to create bonds between layers, called lamination. The next type of lamination is to glue several wood planks together and make a wide bed.
Finally, the most common form of lamination is to attach a thin layer of wood veneer or jacquard plastic to the surface of the particle board. As we can see, there are several types of lamination processes, so one glue will not perform for all types of applications. The common types of glue for laminating:
- Polyvinyl Acetate (PVA)
- Polyurethane Glue
- Contact Cement
- Urea Formaldehyde
Polyvinyl Acetate (PVA)
It is popular and widely praised as wood glue or carpenter’s glue. You can use it in two available colors. The clear glue goes with every type of general domestic purpose. Another glue is yellow, which is much stronger than the clear one; it has a longer open period while it remains liquid and effective. You have to use clamps to bond two pieces of board. Some varieties of PVA are waterproof.
Polyurethane glue is slightly weaker than PVA and has the same open time. It is also called Gorilla Glue, as they first introduced this adhesive in the USA. You can apply it not only on particle boards but also on many products, including paper, metal, stone, foam, ceramic, glass, and even concrete. It is waterproof and fills gaps. In addition, you can use it for external lamination.
Contact cement, or contact glue, is a neoprene rubber carried in a water-based solvent. It is used mainly for nonporous surfaces, for which standard adhesive is not efficient. Contact cement is cost-friendly. It would be an ideal adhesive to laminate a large area, like kitchen or bathroom countertops. You will need a clamp to get a stronger bond.
As cement glue can be emulsified into the solvent, you have to coat cement glue on both pieces of material surfaces. Then allow the glue to dry; once the solvent evaporates and the glue becomes tacky, press two pieces together with a clamp. You will get a flexible bond with no moisture exists; that is why the cement bond is moisture-proof.
Urea Formaldehyde, also known as plastic resin glue or urea-methanol, is the most widely used adhesive in wood products. It is best used on curved wood. Carpenters like it most as it does not stretch and pull away at the sides of planks. You will need a clamp to join the two pieces; the open time is the same as for PVA.
The glue is flexible enough to bond two wood pieces together with the same strength everywhere; the press is not equal throughout the surface.
10 Best Particle Board Glue Reviews
Now we will check some of the best glues for different uses.
Best Glue for Particle Board: Gorilla Ultimate Waterproof Wood Glue
Whatever the size or complexity of your projects, you will always find a suitable solution from Gorilla. The Gorilla Ultimate Waterproof Wood Glue is ultimately formulated as particle board glue. It is strong and long-lasting and can resist water, humidity, and extreme temperatures.
It is an ideal adhesive for outdoor applications where moisture and temperature are matters of concern. You can apply it at a temperature as low as 50° Fahrenheit. The glue comes in an 8-ounce plastic bottle. Sometimes you may find it a bit hard to get out because of its density and the edges also may dry up. You have to open the tip up and dig in with a pin.
It is easy to clean; you can remove excess glue, which comes out during clamping, with a wet cloth. Also, scrape off the hardened adhesives when it dries. It dries quickly within 20-30 minutes, still, you should allow it 24 hours for best curing.
One of the best features you need in wood glue is if it’s. And this glue allows you to do the same when it fully cures. Plus, it dries to a natural color, so apply it to finished boards, and also it creates no foam.
- Waterproof glue
- Easy cleans up with water when wet
- Thick adhesive
- Does not drip all over the place
- 15 minutes open assembly time
- Easy spreading
- 20-30 minutes drying time
- Sandable and printable
- No foam
- Natural color after dry
- Bit hard to get out
Best Glue for Applying Paper to Particle Board: Lineco PVA Adhesive
Lineco Neutral pH Adhesive is a permanent adhesive. It comes in a plastic bottle with 32 oz glue and works great with every kind of engineered wood and hardwood. Besides, it performs well with paper, collage, framing, crafts, bookbinding, and some fabrics.
The glue dries extremely fast and precisely; you can use it with white particleboards. it has a good thickness; you might need to make it a little thinner for some of your projects. Sometimes, this glue becomes a rubbery chunk in a freezing condition and will not return to its liquid state. Try to avoid ordering during freezing weather.
It is one of the best glue for applying wallpaper to particle boards. Note that it makes a strong bond, and you can easily use it for mounting artworks. In addition, the thicker glue works as both adhesive and sealant.
- Archival quality.
- Easy application at room temperature
- Good lay-flat properties
- Buffered for added protection
- Fast Dry
- Does not wrinkle paper
- Make no bubbles
- Might freeze in extreme cold
Best Glue for Dowels in Particle Board: Gorilla Clear Glue
Gorilla Clear Glue is a great adhesive with extreme strength that can bind virtually everything. It comes with a 5.75 oz glue. Do not worry if your project is large. You will need to apply only 1/3 oz per square foot to get the best result. Do not forget to clamp two pieces for at least 2 hours, and allow 24 hours for the best bond. For repositioning, you have to do it within 15 minutes.
This Gorilla clear glue is water resistant which makes it flawless for indoor and outdoor use, though you might not use particleboard outdoor.
- Open time of 5 minutes
- Crystal clear after dry
- Irritating to the eye and skin
Best Glue for Cabinets: Gorilla Polyurethane Glue
Gorilla 5021801 Waterproof Polyurethane Glue is an ideal glue compatible with an extended range of materials like board, wood, foam, glass, ceramic, concrete, metal, and stone. The water-activated polyurethane formula expands three times into materials and bonds them at industrial strength.
To get the best result, dampen one surface, apply glue to the other surface, and clamp both pieces together tightly. This Gorilla Polyurethane Glue is waterproof, use it for laminate cabinets without worrying about humidity. It’s a moisture activated substance which means it works well on a slightly damp surface. It can protect your kitchen containers from getting penetrated by water. Plus, this glue will repair any kind of broken cupboard as it pressures itself into the tiniest crack.
The glue comes in an 8oz plastic bottle, and each bottle contains 1 oz of brown glue. The glue expands as it starts to set on the particle board surface and hardens. Yet, you can easily remove the extra glue with a knife or sand it when it completely dries.
Gorilla Polyurethane Glue glue might irritate the user’s eye and skin and produces a mild smell because of its solid bonding agents. You’re recommended to use gloves. Try not to get it on your hand.
- Repair kitchen cabinet
- Stainable after full cure
- Moisture activated
- Eye and skin irritating
- Mild smell
- Cause allergic skin
Best Glue for Mirror to Particle Board: Loctite Mirror Adhesive
PL 520 Mirror Mastic Adhesive is popular for attaching mirrors to particle board projects. Unfortunately, few types of glue work well with mirrors, but this excellent product from the Loctite store will not frustrate you. It comes with a 12 pcs package which may seem expensive to some people.
PL 520 Mirror Mastic does not harm the mirror surface; it builds a safe, strong, and permanent bond. And drying time is beyond expectation- it bonds with a full cure time of 2 seconds. No need to spend a single minute on clamping.
- Fastest dry within 2 seconds
- Easy mounting mirrors on particle boards
- Suitable on structurally sound surfaces
- Little expensive
Best Glue for Particle Board and Metal: Elmer’s Advanced ProBond
Elmer’s E7502 is another great glue for particle board that attaches metal and board with a strong bond. It comes in a 4 oz bottle of clear glue. This shows grey in wet states and dries clear; you need not worry about having stains on the transparent mirror surface.
It was developed for bonding porous surfaces to nonporous surfaces; therefore is an ideal adhesive to bond wood, concrete, and drywall to impermeable metal, glass, and ceramic. It takes 15-30 minutes to dry. In some cases, it can take several hours to completely dry.
Like all other Elmer’s great products, E7502 glue is also non-toxic. Also, it does not create foam; thus it does not expand on flat surfaces and works great. The paintable glue leaves tremendous options to make the surface smooth without stain.
- No foam at all
- Dries clear
- Ideal for hard surfaces
- Unsuitable for soft objects
Best Glue for Laminating Wood: Titebond Tongue and Groove Glue
To laminate particle board and hardwood, you will need specialized glue, and you can count on Titebond Flooring Glue without a second thought. It does a fine job of framing and laminating all types of floors, including floating floors.
The budget-friendly priced adhesive comes in a 16-ounce bottle. To prevent the glue from drying, shake well and apply it at room temperature. Storing in direct sunlight or freezing may harm the adhesive properties.
- This Titebond glue works even over a radiant heat system.
- It has good water resistance like type 2.
- Originated in the USA, it has superior bond strength.
- The glue can cause eye and skin irritation.
Best Glue for Particle Board Furniture: CAT PALM B-7000 Adhesive
CAT PALM B-7000 Adhesive is a multifunctional semi-fluid glue. It comes with an excellent, super strong formula that works with gas, liquid, and airflow. Use this incredible glue with glass, metal, wood, plastic, ceramics, and jewelry. The pack combines two tubes, each with 0.9oz of clear glue. It works equally on both porous and nonporous layers.
It dries out within 6 minutes. To get the best cure, allow 24 hours.
- CAT PALM B-7000 Adhesive has a threaded needle that helps allow tiny drops only.
- Its needle is not easy to clock.
- The bond is clear and does not turn yellow. So it is convenient to use with a white and transparent surface.
- This glue was developed with waterproof formula and is insoluble in water.
- CAT PALM B-7000 is highly elastic and can extend to 900%.
- The adhesive is soft with an anti-vibration attribute.
- It has a little spiky odor.
- Some people might find the glue insufficient for more prolonged use. However, carefully using two packs will cover a large project.
Best Glue for Plastic to Particle Board: J-B Weld Epoxy
J-B Weld Epoxy is renowned when you need a better glue to bond plastics with particle boards. It is available in a cartridge form with 2oz glue. It is a hand-mixable & fast-setting epoxy putty adhesive.
- It has a long shelf life, even three years when carefully used.
- The glue dries off-white.
- Its curing time is 3 hours and it sets within 20-25 minutes.
- The glue does not shrink.
- The adhesive is paintable; it is also easy to drill, sand, and saw.
- It is drinking water safe.
- You need to cut the exact size for the repaired area, or else it may fail to fix.
Best Glue for PVC to Particle Board: Gorilla PVC PrimaGlue
Gorilla Clear PVC PrimaGlue is probably the best glue to bond pieces of PVC and any kind of wood, including particle boards. It also works to stop any leakage in PVC water pipes. An economical package that comes in a 4oz can while it has long shelf life when carefully stored.
Gorilla Clear PVC PrimaGlue is strong; it creates an unbreakable bond between two pieces. Plus, it’s clear, odorless, and non-flammable. You can clean up unexpected or extra glue with water. And don’t fear toxicity, this amazing glue is toxic-free to use safely.
Gorilla Clear PVC PrimaGlue has a low odor like every PVC glue has. But it does not mean to avoid it, you can easily allow little odor for its superb fitting capability.
- Easy clean with water
- No need any primer
- Long shelf life
- Low odor
What to Consider Before Buying Particle Board Glue
Now you have a good idea about which type of glue to use for particle board projects. However, some other properties influence the glue’s performance, and you must check them well before picking on the shop. Check the following features:
- Water Resistance
- Drying Time
The form of particle board is water-resistant, not waterproof. It will not stand against water flows or showers for a long time. While completely drowning in the water, the wood chips soak the water and get puffy. In extreme cases, the board will collapse. Particle board is never used outdoors; hence water-resistant glue is not much required to use with it.
However, to make kitchen cabinets, you will need a water-resistant adhesive. Most PVA and polyurethane glues are water-resistant, so you can use them in the kitchen. And for the same reason, polyurethane glue is suitable for both indoor and outdoor use.
Temperature is a crucial matter in choosing suitable glue for particle boards. These are mainly used for interior decoration, and the temperature inside the home will not be extreme outside, so we should not be worried about excessive heat. However, If a glue works at a minimum temperature of 37 degrees, it is not likely to dry and set below 37.
For general usage, you should choose glue with a minimum degree of 50~60 Fahrenheit. Do not store glue inside freeze; the properties of bonding agents will be ruined. Below 50 degrees, PVA glue does not develop a strong bond and takes days to set.
Glues have different final finish colors while it dries; it turns yellow, white, or clear.
- Yellow is the most suitable color for a hardwood finish look; it is still used with veneered or laminated boards.
- Melamine boards have a white surface; hence the glue that turns white is ideal.
- Clear glue is invisible when dry, so it goes well with almost any particleboard. However, you can combine different finish glues to get the desired look on your interiors.
Thinner glue is easier to use; it runs efficiently on the surface and edge of the particle board. However, it depends on necessity while selecting either thicker or thinner glue. Thinner glues dry faster than the thicker ones, and it helps release extra work on the pieces that require holding to get joined.
While making furniture or cabinets, you need to set some pieces vertically. However, it is more challenging to get those vertical pieces bonded since thinner glue starts running and dripping. To avoid this problem, you must choose thick glue, like viscous wood glue. However, thick adhesives squeeze out when you press the two pieces together.
Those extra glues will get hard after drying, making the piece look ugly. Also, unwanted glues disturb the smooth finish of the joint. So you have to wipe the extra glue off the joints.
Drying times of glue differ remarkably. For example, some glues dry within seconds while some even take long hours to dry. So you should select adhesives carefully based on the project you are working on. For shorter drying hours, you can hold two pieces of board yourself or use a clamp if it takes longer. You do not need to worry about extra labor while using instant glue; just paste, and the pieces get bonded.
However, while the glue takes longer minutes to dry, you must choose a clamp. You should not hold pieces for more extended times; a little movement will lose the bond.
If you use particle board in the kitchen or garden, where the panels will come in contact with water, you should not select the regular particle board glue. Everyday glue will not stand against moisture, and the quality will get ruined soon. So choose a high water-resistant glue in this case.
Different Types of Particle Boards
Like any other engineered wood, particle boards are available in several variations. The most common forms are:
- Single Layer Particle Board
- Three-Layer Particle Board
- Graded-Density Particle Board
- Melamine Particle Board
- Cement-Bonded Particle Board
- Veneered Particle Board
- Laminated Particle Board
Check the most common types in the following sections.
Single Layer Particle Board
Single-layer particleboard is flat, thick chipboard made from same-sized wood grains. It is ideal for interior usage but not a waterproof element. However, it behaves water-resistant. It does not take paint, so painting will be the wrong choice to apply to it; instead, it’s better to use a veneer or plastic lamination to cover the core.
Three-Layer Particle Board
Two kinds of wood grains are used to produce a three-layer particle board. First, two layers of tiny wood dust stay on the outside, including a mid-layer of larger wood grains. Next, more resin glue is applied to the outside slim grain layer, making the surface smooth and suitable for painting.
Graded-Density Particle Board
The layers of the graded-Density particle board are the same as the forenamed boards. The difference in this board is one layer of rough wood shavings is in the middle of two layers of fine wood particles, and all three layers are highly compressed. Therefore, a graded-density board is a perfect choice for making cabinets. Also, you can use it for furniture.
Melamine Particle Board
The wood shavings in the Melamine particleboard are bonded with melamine-urea formaldehyde resin; wax emulsion is also used. Hence, it becomes water-resistant. On the top of the board, a decor paper is infused with melamine and turns out scratch-resistant.
This board is suitable for use in wall paneling and cladding. As it resists water, you can use it to make modular kitchens and other furniture.
Cement-Bonded Particle Board
The variation of a cement-bonded particle board to other boards is the bonding agent; mainly magnesium-based cement or Portland cement is used for bonding glue. The ratio of the elements is maintained in a simple way where cement is 60%, wood shavings are 20%, and these two solid materials are mixed with 20% water.
The cement-based agent makes the board resistant to moisture and fire. Also, it becomes termite and rot-resistant. Cement-bonded particle board is an ideal fit for indoor usage where humidity is high and general boards get easily affected & rotted. You can select this board for walls, false ceilings, and subfloors. And you can use it to cover concrete. Another best use is to make fire-resistant furniture.
Veneered Particle Board
A veneered particle board is a regular one-layer or three-layer particleboard; the difference is it has a thin layer of wood infused outside, called veneer, having an average thickness of 3mm. Due to the veneer hardwood skin, this board is warping-resistant and ideal for decoration and furniture.
Laminated Particle Board
The Laminated particle board is similar in characteristics to the veneered particle board. The distinction is it has a lamination on the exterior. Due to the variation of unlimited patterns in lamination, you can use it for stylish pieces. In addition, it is a strong and long-lasting board.
Differences Between MDF, Particle Board, Plywood, or Melamine?
MDF (Medium Density Fiberboard) is a fiberboard made from wood fibers mixed with resin & wax. The fiber comes from both hardwood and softwood. Therefore the quality differs. It is stronger than particle board but does have the strength of plywood. It is made of fine wood fibers, so MDF is cheap; it is also easy to use, paint and cut to different shapes.
The major disadvantage is it is heavy; you will find your projects need more labor to move. In addition, you may find it difficult to mark on the surface, and the cutting blade becomes blunt quickly.
Particle boards are made of different materials, including wood shavings and fine dust; all are waste wood. It is cheaper and lighter than other engineered boards. Therefore, it is best to make shelves and partitions. However, it is not moisture-proof and fades quickly. To protect it, veneer or lamination is applied on the surface.
You can not use screws; there is nothing solid inside to hold. A big disadvantage is that the particle board is fragile. To increase its strength, cement or melamine is mixed.
Plywood is made from several wood veneers; all those long pieces are pressed together to make one sheet. It is heavier than MDF and board. The price and quality depend on the type of wood ply, adhesives, and manufacturing process; as it takes hardwood veneer, the thickness of plywood plays a vital role in fixing the price. It has high strength and stability.
Melamine board or melamine-faced chipboard is mainly laminated particleboard, a wood chip covered with saturated paper. UF resin and MF resin are used to fix the paper on boards. This is a good quality board, ideal for indoor furniture, doors, and cabinets. It is easy to cut and install, with no chipping.
Melamine board has a high bending strength and moisture-proof quality, which is ideal for all temperatures. The melamine paper can be of various hardwood shapes, and you can select teak, oak, chester, walnut, cherry, mahogany, and more.
How to Glue Laminate to Particleboard?
Contact cement is the best adhesive to fix laminate to particle board. Grease both the laminate paper and board; let them dry for 60-70 minutes. It may take more or less time based on temperature or humidity.
Lay down a few dowel rods of 1/4 inch height and position them on the board at an equal distance of 12-18 inches; lay down the paper on the dowels. Next, start removing rods from the middle and press the laminate so that it attaches well. And continue the same way to the end. Finally, press the same all over the laminate and ensure no air bubbles are hidden.
Frequently Asked Questions About Gluing Particle Board
How Does Temperature Change Affect the Glue?
A low temperature keeps the glue viscous. At higher temperatures, the glue becomes thinner.
How Long Does it Take for a Perfect Bond?
Though some glues take longer to dry, they will not exceed 24 hours to form a secure bonding. Check the descriptions well and choose the right adhesive.
How to Store the Glue?
The glue is kept on dry and open shelves in the store. You can do the same at home; select a cool, dry place inside your home. Make sure to close the lid or cap tightly after every use. Else, the glue may dry up and get hard. Plus, you should check if there is a lick on the body or lid; the air may enter and dry up the glue.
Why is Super Glue Used for Particle Boards? What’s the Difference Between Super Glue and Wood Glue?
Super glue is instant glue suitable for minor repairs like a tiny crack. However, it does not have much strength to join two separate pieces; in that case, you have to go for wood glue.
Does Wood Glue Work on Particle Boards?
Yes, wood glue works on particle boards. Particle boards are made of wood shavings and sawmill dust.
Can I Use Particle Board Glue for Other Uses?
The particle board glue is wood glue and will work on other boards well and on paper, plastic, or hardwood.
What Glue is Used in Particle Board?
You can use standard wood glues, polyurethane super glues, and cement glues with particle boards.
How Long Does it Take for a Glue for Particle Boards to Dry?
Some glues dry fast, and some take more extended hours. However, producing a secure bond will take 24 hours to dry.
How Long Can a Glue for Particle Boards Last After Applying?
Wood glues are archival quality. However, particle boards are water resistant and not waterproof, and moisture-proof. Moisture ruins the bond of the glue. As long as you can prevent particle board projects from humidity and excessive water, you can expect the glue to last forever.
Which Glue is Best for Melamine Covered Particle Board?
Melamine is a chemical compound with a hard resin surface. DAP Weldwood or Roo glue will work best for melamine-covered particle boards.
How Long Does Glue Last?
Most glues will persist for more than two years if stored at room temperature.
What is the Best Glue for Particle Board Used in Melamine?
DAP Weldwood contact cement is one of the best glues to attach melamine veneers to particle boards. However, you can use a paintbrush to apply the glue to a broad surface to get the maximum output.
Glue is a must-need tool. Particleboards are used for a lot of different types of indoor and outdoor projects. And the appropriate glue will make it successful. Always read the instructions mentioned on the package.
We believe you found this article guide informative and valuable in your quest. Happy creating.